FAQs | Find Answers

Search Results

Results 71 - 80 of 105

Recommended Links
  1. AirStation's Network USB cannot be used after installing Windows 10 Fall Creators Update
    [Answer ID: 16387]
    It makes SMBv1 invalid that rebooting your PC just after installing Windows 10 Fall Creators Update on and not using SMBv1 during 15 days. Therefore, an USB device attached to the AirStation cannot be made available to the network. ...
  2. How to Reset the Password for the LinkStation
    [Answer ID: 14913]
    To reset the password for the LinkStation, initialize the LinkStation to its factory default with the function button.Note:For LS-XL, initialize the LinkStation from Settings. LS400...
  3. How to Get Data Transfer Speed Faster
    [Answer ID: 15057]
    When the LinkStation is set to enable DLNA to play files in the shared folder such as “share“, transfer speeds are slower. Disabling DLNA will get data transfer speed faster. Follow this procedure to disable DLNA....
  4. LinkStation 400 – How to Set Jumbo Frame Size
    [Answer ID: 15098]
    Enabling jumbo frames support will greatly improve read/write operation to NAS device on the LAN network.However, jumbo frame setting may not be supported by some routers and host PCs. Internet access may not be possible due to MTU setting variation and limitation of intermediate routers....
  5. LinkStation 400 – How to Use USB Devices Connected to the LinkStation with Multiple Computers
    [Answer ID: 15123]
    USB Device Server lets you use USB devices connected to the LinkStation with multiple computers. Enabling USB Devices 1.Install the driver and software by connecting the USB device to the computer....
  6. LinkStation 400 - How to Connect a Printer to Your LinkStation
    [Answer ID: 15124]
    You can connect a printer to the USB port on the LinkStation. Settings up a Printer with Windows 8, Windows 7, or Windows Vista Setting Up a Printer with Windows XP Notes:•Only one USB printer can be connected to the LinkStation....
  7. How to Work Around the Error “Failure” on the Hot Spare Configured Drive
    [Answer ID: 15125]
    If you initialize your TeraStation's settings, you may have a "Failure" status on a hot spare drive. If NAS Navigator2 or the TeraStation's LCD doesn't show the error message "HDx Broken E30 Replace the DISK", the drive doesn't fail....
  8. Even if NTP is enabled, the time on the TeraStation is out of synchronization with NTP server
    [Answer ID: 15130]
    If you initialize your TeraStation's settings, over a long period of time the internal clock of the TeraStation may show somewhat different time with NTP server even if NTP is enabled. In this case, adjust the time by either of the following ways:...
  9. The TeraStation may not send you an email notification of quotas.
    [Answer ID: 15132]
    If you initialize your TeraStation's settings, the TeraStation may not send you an email notification of quotas.Delete files before quota exceeded. Updated firmware fixing this problem will be released at the end of August, 2013. You will be able to download the updated firmware from the following URLs....
  10. LinkStation 400 - How to Add a Shared Folder
    [Answer ID: 15135]
    1.In Advanced Settings, navigate to [File Sharing] - [Folder Setup] and click the icon. How to Open Settings 2.Click [Create Folder]. 3.Configure the settings, then click [OK]. Notes:...
< Previous  3  4  5  6  7  8  9  10  11  Next >

Refine your search

Select Product / OS & Hardware

      Enter Keywords or a specified ID