[Answer ID: 15005]
TeraStation - Replacement Hard Drive
Created 05/20/2013 11:04 | Updated 11/07/2013 09:46
| Note: | LinkStation Quad 6 TB & TeraStation ES, III and III iSCSI 6 TB models (specifically: LS-Q6.0TL/R5, TS-XE6.0TL/R5, TS-X6.0TL/R5, TS-RX6.0TL/R5 and TS-RIX6.0TL/R5) use 1.5 TB hard drives and should use OP-HD1.5T as the replacement drive. For all other capacities and models, please refer to the chart above and then select the appropriate capacity. |
| * | Some TeraStation devices were originally supplied with 512 or 4K drives depending on when they were produced. It is recommended to replace drives with the same sector size to maintain proper performance. If the TeraStation currently has 512-byte sector hard drives, then OP-HD512-3Y replacement drives should be used. If the system has 4K sector drives installed, then OP-HD4K-3Y should be used. Mixing sector size hard drives inside the same array can lead to reduced RAID performance and is not recommended. Specifically for TeraStation Pro WSS units, mixing sector sizes is not supported and RAID arrays cannot be rebuilt using mixed drives. |
Details
Products
OS / Hardware
Was this answer helpful?
Please tell us how we can make this answer more useful.