[Answer ID: 14330]
TeraStation LED codes / Error codes
Created 06/14/2012 12:32 | Updated 04/25/2014 10:47
The DIAG codes listed below are for the original TeraStation products:
1 blink every second RAID Array Configuration is running
1 blink every 4 seconds RAID Error
4 blinks every 4 seconds Internal Fan Error
5 blinks every 4 seconds Flash ROM Error
6 blinks every 4 seconds HDD Error
7 blinks every 4 seconds RAM, LAN, HDD controller Error (logic board problem) Continuous blinks with no break Disk Check or RAID Check Other Light Codes:
|
Disk 1-4 Status/Full Lights |
|
| OFF | Corresponding hard drive not detected |
| Green | Corresponding hard drive detected |
| Green Blinking | Disk Check/Format in progress |
| Red | Drive capacity at over 90% used |
| Red Blinking | Possible physical drive failure |
|
Disk 1-4 Access Lights |
|
| Green Blinking | Hard drive being accessed |
|
Power Light |
|
| OFF | Power source is off |
| Green | Power source is on |
| Green Blinking | System booting or shutting down |
| Green Slow Blinking | Disk Sleep Mode |
|
Link/Act Light |
|
| Blue | 1000Mbps link detected |
| Green | 100Mbps link detected |
| Red | 10Mbps link detected |
When the Link/Act LED is blinking, it denotes network activity in or out of the TeraStation LAN adapter.
Details
Products
OS / Hardware
Was this answer helpful?
Please tell us how we can make this answer more useful.