[Answer ID: 14232]
How to Use JBOD
Created 06/04/2012 15:37 | Updated 10/04/2013 10:30
With JBOD, each hard drive in the TeraStation is addressed separately. Follow this procedure to put drives from an array into JBOD mode.
| 1. |
In the TeraStation's settings, navigate to [Disk Management] - [RAID Configuration] - [RAID Array 1] and you can delete the RAID array.
|
| 2. |
The unit will then use the disks independently.
|
| 3. |
Under Shared Folder Settings, you can create new shares and set them to use the drive number that you want.
|
How to Open SettingsDetails
Products
OS / Hardware
Was this answer helpful?
Please tell us how we can make this answer more useful.