What does the message on the LCD display indicate when the INFO LED is turned on? (TS-X series)

Examples of LCD

Meaning

Resolution

I11

HDx　Warning
Bad Sectors

Bad sectors in Xth hard drive may reach the dangerous zone.

Replace Xth hard drive.

I12

Operation Mode
DEGRADE MODE

RAID Degrade mode is running.

-

I13

RAID
ARRAYx Formatting

Formatting Xth RAID Array.

-

I14

RAID
ARRAYx Checking

Checking Xth RAID Array.

-

I15

RAID
ARRAYx Scanning

Investigating the error status occurred in Xth RAID array.

* During the investigation, transfer speed will be degraded.

-

I16

RAID
ARRAYx Creating

Creating Xth RAID Array.

-

I17

RAID
ARRAYx Resyncing

Resyncing Xth RAID Array.

* While resyncing, the transfer speed will be degraded.

-

I18

RAID
ARRAYx Rebuilding

Rebuilding Xth RAID Array.

* While rebuilding, the transfer speed will be degraded.

-

I19

RAID
ARRAYx 0 Filling

Deleting data completely by filling 0 into Xth RAID array.

-

I20

DISK
DISKx Formatting

Formatting Xth hard drive.

-

I21

DISK
DISKx Checking

Checking Xth hard disk.

-

I22

DISK
DISKx 0 Filling

Deleting data in Xth hard drive.

-

I23

SYSTEM
Initializing

Initializing the system.

-

I25

SYSTEM
F/W UPDATING

Updating the TeraStation's firmware.

* Do not turn off the TeraStation while updating.

-

I26

Web Setting
Initializing

Initializing web configuration.

-

I27

USB Diskx
Checking

Checking Xth USB hard disk.

-

I28

USB Diskx
Formatting

Formatting Xth USB hard drive.

-

I31

Press FuncSW
New Diskx ready

This message is displayed when restructure RAID by pressing a function switch after replacing the hard drive.

Press a function switch for rebuilding RAID array.

I32

Set From Web
New Diskx ready

This is displayed when RAID needs to be restructured on the Web Admin interface or formatted after replacing the hard drive.

Rebuild RAID array or format on the web admin interface.