[Answer ID: 11865]
What does the message on the LCD display indicate?
You can switch the display by pressing the Display switch button on the front of the TeraStation.
You can configure the displayed items in [System] - [Maintenance] - [Front Panel Settings] on the Web Admin interface.
| Examples of LCD | Meaning | Resolution | |
|
LINK SPEED * If connecting a LAN cable to the LAN Port 2, "LINK SPEED2"is displayed. |
LINK SPEED No LINK |
Not connected to the network. | Connect LAN cable to LAN port on back of the TeraStation. |
| LINK SPEED 10Mbps HALF |
Connected as 10 Mbps half-duplex. |
- |
|
| LINK SPEED 10Mbps FULL |
Connected as 10 Mbps full-duplex. |
- |
|
| LINK SPEED 100Mbps HALF |
Connected as 100 Mbps half-duplex. |
- |
|
| LINK SPEED 100Mbps FULL |
Connected as 100 Mbps full-duplex. |
- |
|
| LINK SPEED 1000Mbps |
Connected as 1000 Mbps full-duplex. |
- |
|
|
Host Name/IP Address * The example shows the display for TS-XL Series. |
TS-XL xxx 192.168.11.150 |
Displays the host name and the IP address The letter F (the static IP address) or D (expresses that the IP address is automatically obtained by the DHCP server) is displayed at the end of IP address. * If connecting a LAN cable to the LAN Port 2, the Host Name is displayed as "NETWORK2". |
- |
| Calendar/Clock | DATE TIME 2010/12/27 10:30 |
Displays the date and time that is set to TeraStation. |
- |
|
Operation/MODE * The example shows the display for TS-XL Series. |
HD 1-2-3-4 RAID6 |
Structuring RAID 5 using the hard drive 1 to 4. |
- |
| HD 1-2-3-4 RAID5 |
Structuring RAID 5 using hard drives 1 to 3, and 4 as a Normal mode. |
- |
|
| HD 1-2-3: RAID5 4：SINGLE |
Structuring RAID 5 using hard drives 1 to 3, and 4 as a Normal mode. |
- |
|
| HD 1-2-3: RAID5 4：STANBY |
Structuring RAID 5 using hard drives 1 to 3, and 4 as a Hot Spare. |
- |
|
| HD 1-2-3-4 RAID0 |
Structuring RAID 0 using the hard drive 1 to 4. |
- |
|
| HD 1-2-3-4 RAID10 |
Structuring RAID 10 using the hard drive 1 to 4. |
- |
|
| HD 1,2,3,4 SINGLE |
Using 4 hard drives (1 - 4) as stand-alone drives. |
- |
|
| HD 1-2: RAID1 3-4: RAID1 |
Structuring RAID 1 with the hard drive 1, 2 and 3, 4. |
- |
|
| HD 1-2: RAID1 3,4: SINGLE |
Structuring RAID 1 with hard drives 1 and 2, and using hard drives 3 and 4 as stand-alone drives. |
- |
|
| HD 1,2: SINGLE 3-4: RAID1 |
Using hard drives 1 and 2 as stand alone drives, and structuring RAID 1 with hard drives 3 and 4. |
- |
|
|
Disk Space * The example shows the display for TS-XL Series. |
HDD USED 1_2_3■4■ |
Indicates the usage of TeraStation's internal hard drives 1 - 4 in bar graph. If the hard disk is full, "^" is displayed. * If you are using TS-RXL Series, it is displayed as a following example (the displayed value is approximate, and it is displayed every 6 to 7 %. "D1: 13% D2: 0% D3: Full D4: 25%" |
Delete unnecessary files if LCD displays "Disk Full". Also, you can increase free space by deleting the files in "trash" box. |
Details
